V Series Electric Actuators for CST Butterfly Valves

Clear

Description

For CST Butterfly Valves 

V Series

V Series actuator is CSA special inspection labelled.  Standard features include NEMA 4X enclosure of die cast aluminum with baked  hybrid epoxy coating and stainless steel trim, manual override, beacon visual position indicator, permanently lubricated gear train and dual 1/2” NPT conduit ports.  All actuators are supplied with humid environment heater/thermostats, 2-wire control capability and extra feedback switches as standard (24 VAC/VDC – 5A maximum).  For 24 VAC/VDC, replace “.12” with “.46” in the Item No.

The V Series Electric Actuator is a reversible rotary unit with output torques up to 8,860 in.-lb. These actuators are ideal for butterfly valves up to 20”1 size, as well as all sizes of  ball valves up to 6”. The V Series actuator features a moulded Polyamide 6.6 cover, a die cast aluminum base with a thermally bonded epoxy powder coating, rated as a NEMA 4X enclosure. NEMA 7 and 9 enclosures are available. Consult JJD.  We also offer complete actuated ball, butterfly and diaphragm valves, assembled and bench tested. Actuation service is also available for all quarter-turn metal valves.

Features

Multiple Operation/Control Options
• 2 & 3-wire (standard)
• Adjustable Travel (standard)
• Adjustable Travel Stops (standard)
• Manual Override (standard)
• Bus Communication (optional)
• Digital Positioner (optional)
• Failsafe (optional)
• Cold weather Heater/Thermostat (standard)

Multiple Feedback Options
• Visual (standard)
• Feedback Switches (standard)
• Extra Feedback Switches (optional)
• Feedback Potentiometer (optional)
• Feedback Transmitter (optional)

CSA Approved

NEMA 4X/IP67 Enclosure
• Waterproof, corrosion proof with high impact Polyamide 6.6 cover, thermally bonded epoxy powder coated die cast aluminum base and stainless steel fasteners

No Maintenance
• Permanently lubricated gear train
• Designed for 250,000 + cycles

Thermal Overload Protection
• Thermal switch embedded onto control board

Extended Operating Temperature Range
• –10 to 60 degrees C (15 to 140 degrees F) (standard)

Standard Mounting Dimensions
• ISO-5211 mounting bolt circle and drive

Technical

Operating Voltage
• 115/220 VAC 50/60 Hz (standard)
• 12/24 VDC or 12 VAC 50/60 Hz (optional)

Electrical Conduit Entry
• 2 x 1/2” NPT

Motor Direction
• Reversing

Motor Cycle Time
• Fixed (standard)